Videos

Check out our YouTube channel or click below to watch the video of your choice:

 

20170309-ChemicalSafetyWorkplace

Chemical safety in the workplace: an example of better regulation? (March 2017)

During this workshop, EURACTIV.com, with the support of Nickel Institute, examined how the proposed revision of the Carcinogens and Mutagens Directive (CMD) lives up to this promise. The CMD is one of the central elements of EU workplace legislation and is of extreme importance to ensure the health and safety of European workers.

20161110-ImpactAuth 

Impact of REACH Authorisation: costs and benefits (November 2016)

On Thursday, 10th of November 2016, Ingeborg Grässle Member of the European Parliament hosted a breakfast briefing on the “Impact of REACH Authorization: costs and benefits of REACH Authorization”. The event was timely organized, in the European Parliament, ahead of the European Commission’s REFIT report on REACH to be presented in June 2017. The event attracted 50 representatives from the EU Institutions, the Missions of third countries to the EU and industry who actively participated at the event.

20160913-metals matter

The EU Circular Economy: why metals matter (November 2015)

Metals matter in the EU Circular Economy. Why? Check out this 2 minute animation to find out.

20160218-MetalleDigital

Metalle Digital (February 2016) (This video is in German only)

Non-ferrous metals are a prerequisite for digitalisation. Explanation in less than 2 minutes!

20151118-SME week event

How to raise our game? New approach to European Industrial Competitiveness (November 2015)

On the occasion of the European SME Week 2015, Austrian MEP Paul Rübig hosted a breakfast briefing in the European Parliament on 17 November on the "New Approach to European Industrial Competitiveness: SMEs in the Surface Engineering Sector". The event was attended by stakeholders comprising European Commission, European Parliament, EU Permanent Representations and Missions of third countries to the EU. Industry was also present as well as relevant SMEs, notably Dave Elliott, Chief Executive of the Surface Engineering Association.

20150924-Euractiv Berlin 

Aktuelle Stoffpolitik: REACH versus Arbeitsplatzgrenzwerte? (September 2015) (This video is in German only)

20150701-EuractivBrussels

REACH, a test case for better regulation - Towards safer chemicals management in the workplace (July 2015)

With the adoption of the Better Regulation agenda on19 May, the European Commission is taking the first concrete steps in the definition of its policy. There is a growing interest across stakeholders for the application of the better regulation approach to the management of chemicals. The Commission, the Parliament, the Council and the industry have started to look into a more consistent interaction between REACH and workplace legislation.

20150617-nonferrous metals

Without non-ferrous metals, no energy transition! (June 2015)

The video demonstrates how non-ferrous metals contribute to achieve an energy transition - with three case studies.

20150430-EQS

An introduction to Environmental Quality Standards (EQS) for metals (May 2015)

Eurometaux (the European non-ferrous metals association) and ARCHE Consulting are proud to announce the release of their new video, An Introduction to Environmental Quality Standards for Metals. The video demonstrates the principles of metals bioavailability, and how this can be used to calculate site-specific environmental quality standards, or bioavailable metals concentrations, and how environmental compliance can be achieved in a tiered approach.

20140303-NigelNiCoMo
Nigel Ward dicusses Stainless Steel Industry at NiCoMo 2014 (2014) 
20141113-SME week

EU2020 and Industrial Competitiveness: SMEs in the surface engineering sector (November 2014)

The event was hosted on 13 November 2014 by MEP Paul Rübig.

20140401-Cu-Ni alloys welding

Copper Nickel Alloys Welding (April 2014)

The Copper Development Association has developed a series of five video presentations covering the welding of copper-nickel alloys. The information is presented for welders in "welders' language". However, the information should also be of help to the engineers, designers and others who work with the alloys indirectly.

20141101-EagleMineMining

Eagle Mine - Mining Process (November 2014)

Ever wonder how ore is extracted at Eagle Mine? In this video you can see how nickel and copper ore are safely removed from the mine. Ride along with miners as they drill, blast, and muck (excavate) ore from the Eagle deposit.

20141102-EagleMineSurface

Eagle Mine - Surface Tour (November 2014)

A driving tour of the surface facilities of the Eagle Mine. Eagle is an underground nickel-copper mine located in Michigan's Upper Peninsula.

20141103-EagleMineUnderground

Eagle Mine - Underground Tour (November 2014)

Production kicked-off Fall 2014 at the Eagle Mine. The ore is trucked from the mine to the Humboldt Mill for processing. Nickel and Copper concentrates are shipped from the mill via covered rail cars for further refinement.

20141118-InnovationSummit

EU Industrial Policy: What industry needs for competitiveness and growth (March 2014)

Dr. Veronique Steukers from the Nickel Institute puts forward industry's case for the framework conditions needed for competitiveness and growth and discusses the main issues of concern that must be tackled by EU industrial policy.

20140205-InterviewTim

Risk-based decision making - and interview with Tim Aiken (February 2014)

 

Older videos: